48 / 5000 Wyniki tłumaczenia SeaLine Adhesive Sealer MS polymer 200ml white

Name: 48 / 5000 Wyniki tłumaczenia SeaLine Adhesive Sealer MS polymer 200ml white
Brand: Sealine
Price: 65.00 CZK
Availability: OutOfStock

The Symbol : 5900763382083

CODE : 8208

Notify me when the product will be available

Price: 65.00

The loyalty program is only available for logged in customers.

piece

Zamówienie telefoniczne: +48-517-260-626 Leave your phone

Shipping within : 24 hours

Shipping price :

Free delivery

POLYMER

is elastic sealant recommended for sealing and bonding various types of materials.

PRODUCT DESCRIPTION:

POLYMER is recomended for use on :

laminates polyester and epoxyd
gelcoat
steel (galvanized, aluminium, acid resistance)
glass
wood
varnished and primed surfaces
plexi, polycarbonate (without discoloration on surface)
various types of plastic except PE,PP,PTFE
concrete and mineral substrates (ie. gypsum)

Characteristic features of POLYMER

resistance to UV and water (also salt water)
no need to priming
does not discolor surface (does not contain thinners and isocyanate)
can be covered by any type of paint

SURFACE PREPARATION:

Apply on surfaces no need to priming.

Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.

Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line.

In case of application on natural wood, its humidity should be lower than 20%.

Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :

wood: P80~P120
laminate: P200~P400
steel: P80~P120
plastic (various types): P200~P400
Clean surfaces from dust and contamination.

Grease and salt remove using Cleaner Sea-Line®

BASIC INFORMATION:

MS POLYMER

Type	laminat, steel, wood, concret, plexi, etc.
Place	Above and below waterline
Function	sealing bonding
Chemical character	hybrid
Densinity	1,44 g/cm³
Curing mechanizm	apsorption of moisture from air
Elogation at break	to 500% (DIN 53 504)
Tensile strenght	3,0 N/mm² (DIN 53 504)
Tear resistance	20 N/mm
Resistant to temperatures	-40ºC to + 90ºC
Resistant to temperatures for short intervals	to +120ºC (white, black)
Resistant to temperatures for short intervals	to +100ºC (transparent)
Time for skin formation 20ºC	15 minut
Curing time 20ºC	24 h (weld to 3 mm)
Time to contact with water 20ºC	min. 30 minutes
Time to be painted 20ºC	3 day
Shrink	no

Parameters :

Safety Information

Product Purpose
SeaLine MS Polymer Adhesive Sealant is designed for durable bonding and sealing of components on watercraft, providing high resistance to weather conditions and water.

Precautions During Use

Use in well-ventilated areas or outdoors to avoid inhalation of fumes.Avoid contact with eyes and skin. In case of contact, rinse immediately with plenty of water and seek medical advice if irritation persists.Keep out of reach of children.Do not ingest.

Safe ApplicationBefore application, thoroughly clean, dry, and degrease the surfaces.Wear appropriate protective clothing, gloves, and safety goggles during use.Apply the adhesive according to the manufacturer’s recommendations, avoiding excessive application.

StorageStore in a tightly closed container in a cool, dry place, away from heat sources and open flames.Protect from direct sunlight.

Action in Case of Contact

Skin Contact: Wash immediately with water and soap.

Eye Contact: Rinse with plenty of water for at least 15 minutes and consult a physician.

Ingestion: Do not induce vomiting. Drink water and seek immediate medical advice.

User Responsibility
The user must follow the instructions and use the product as intended. The manufacturer is not responsible for damages resulting from improper use.

For further information or clarification, contact the manufacturer or distributor.